- 26 -
Stargel 4
Stargel 4 - 2018/03 - Rev. 00
EN
4
.5
RECIPE AUTOSETUP
Pressing the Decrease button in the Stop mode for about 10" causes the autosetup of cycle
values. Values such as temperature set or consistency Set will be reset to their default values in
all processes (heating cycles, set or free ice cream cycles).
The following message will be displayed:
RECIPES
RESET
4.6
PROCESS ENABLE/DISABLE
To disable processes:
Select the process as if it had to be run, when the name of the cycle to be disabled is displayed,
press and hold the Freezing button until the selected cycle is disabled (an acoustic signal is
emitted) and the following cycle appears.
NOTE
: If all the Freezing cycles are disabled when pressing the relevant key the display shows
"No Programs". Enable the processes again as follows.
To enable all processes:
From Stop mode, press
STOP
stargel
4
key for 10”, the display shows “Loading Programs” and all
processes are enabled.
