background image

25

INDUSTRY CANADA

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the 

following two conditions: (1) this device may not cause interference, and (2) this device must accept any 

interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and 

maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio 

interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically 

radiated power (e.i.r.p.) is not more than that necessary for successful communication. 

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut 

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par 

Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres 

utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée 

équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de 

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de 

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d'en compromettre le fonctionnement.

CALIFORNIA PROP 65 WARNING 

"WARNING" This product contains chemicals known to the State of California to cause birth defects or other 

reproductive harm. For more information on these regulations and a list of chemicals, log on the following 

website address :   

http://www.oehha.ca.gov/prop65.html

Made in China. 

Summary of Contents for ITVS-760B




























Reviews: