6
The target microcontroller connector is a Samtec ERF8 series, rugged high-speed socket, part
number ASP-130367-01.
The rear side features:
B
– FNET Micro connector, which connects the Active Probe to the iC5700 BlueBox
through the FNET Micro cable delivered with the Active Probe.
The top side features:
C
– The indicator light provides the status of the Active Probe as follows:
o
Permanently green - Powered On
o
Blinking green – Establishing connection with the Blue Box
o
Permanently blue – Ready for use
When powering on the system, switch the iC5700 on prior to powering on the target
system; when powering down the system, power off the target microcontroller before
powering off the iC5700.
Use only original iSYSTEM accessories for powering and connecting with the iC5700.
Consult with iSYSTEM before attempting to use any other accessory.
IASAM40ARMPIN20
In conjunction with this Samtec40 to 20-pin JTAG ARM adapter delivered in the package, the
Active Probe can be also connected to target development boards featuring a 20-pin, 2.54 mm
pitch, ARM JTAG debug connector.
Samtec40 to 20-pin JTAG ARM Adapter
The adapter has the following pinout:
Signal
Direction
Signal
Description
Signal
Pin
Pin
Signal
Signal
description
Signal
Direction
IN
Reference
voltage
VTref
1
2
VTref
Reference
voltage
IN
OUT
JTAG
nTRST
3
4
GND
Ground
OUT
JTAG
TDI
5
6
GND
Ground
IN/OUT
JTAG / SWD
TMS/SWDIO
7
8
GND
Ground
OUT
JTAG / SWD
TCK/SWCLK
9
10
GND
Ground
IN
Return TCK
RTCK
11
12
GND
Ground
IN
JTAG
TDO
13
14
GND
Ground
I/O
RESET
nSRST
15
16
GND
Ground
OUT
Debug Request
DBGRQ
17
18
GND
Ground
IN
Debug
Acknowledge
DBACK
19
20
GND
Ground
