3-3
Discharged
Battery
Make Connections in Numerical Order
Charged
Battery
1
2
3
4
(+) (-)
(-) (+)
Do Not Allow the Vehicles
To Touch
Make last connection
on frame away from
the battery
5.
Start the engine of the vehicle with the good (charged) battery.
Run the engine at a moderate speed for several minutes. Then,
start the engine of the vehicle that has the discharged battery.
6.
Remove the jumper cables by reversing the above installation
sequence exactly. While removing each clamp, take care that it does
not touch any other metal while the other end remains attached.
ENGINE COOLING SYSTEM
OVERHEATING
CAUTION: If the Engine Coolant Temperature Gauge shows an
overheat condition or you have other reasons to suspect the
engine may be overheating, continued operation of the engine
(other than as described here) even for a short period of time may
result in a fire, and the risk of personal injury and severe vehicle
damage. Take immediate action as outlined.
If you see or hear escaping steam or have any other reason to
suspect there is a serious overheat condition, stop and park the
vehicle as soon as it is safe to do so and then turn off the engine
immediately and get out of the vehicle.
The engine cooling system may overheat if the engine coolant level
is too low, if there is a sudden loss of engine coolant (such as radiator
hose failure), or if other problems occur. It may also temporarily
55702_Sec03_'08 08.2.12 9:47 AM Page 3
