5-52
2. Press the front of the light against the door panel to insert the tabs
on the reverse side of the front of the light into the door panel.
3. Open the front door, tighten the nut from the inner side, followed
by mounting the rubber cap.
NOTICE: If the socket is not locked firmly, water may infiltrate the
light and cause malfunctioning.
3. Pay attention to the following when mounting.
• Turn the socket to the right to lock it firmly.
Installation
1. Insert the tabs on the reverse side of the rear of the light into the
door panel.
55702_Sec05-2_'08 08.2.12 9:51 AM Page 52
