5-38
BEFORE TILTING THE CAB
CAUTION: To help avoid personal injury and property damage,
•
Park the vehicle on level ground and check that there is enough
space in front of and above the cab.
•
Set the parking brake firmly and block the front wheels.
•
Place the transmission selector in the “P” (Park) position.
•
Secure loose articles in the cab.
•
Stop the engine.
•
Close the cab door.
•
Keep the area surrounding the cab clear.
TILTING THE CAB
1. Check that all personnel are clear of the cab.
2. Read the label on the rear of the cab.
3. Unlock the cab tilt lever (2) while pulling the lock lever (1).
4. Hold the assist handle (3) and pull the safety lever (4).
5. Raise the cab fully and be sure the cab support (5) is locked by the
lock lever (7).
6. Insert the safety lock pin (6).
ACCESS TO THE ENGINE
Access to the engine coolant reserve tank cap and the engine oil
dipstick is located on the engine left side after tilting the cab.
Add engine coolant as described previously in this section “Engine
Cooling System Care”. Refer to “Engine Cooling System Overheating”
in Section 3.
Engine Oil Dipstick
Right rear cab
55702_Sec05-2_'08 08.2.12 9:51 AM Page 38
