![Isuzu 4ja1 Workshop Manual Download Page 217](http://html1.mh-extra.com/html/isuzu/4ja1/4ja1_workshop-manual_2094380217.webp)
FUEL SYSTEM 6C – 35
Second nozzle opening pressure adjustment
If the second nozzle opening pressure is not as specified,
disassemble the nozzle from the nozzle holder and
replace the shim until the pressure is as specified.
CAUTION:
•
Because the second opening pressure changes
when the first opening pressure changes, the
second opening pressure must be adjusted when
the first opening pressure changes.
•
Use a micrometer to measure shim thickness.
•
Use some combination of 3 adjusting shims to
adjust the pressure.
• Second nozzle opening pressure adjusting shims
Part No.
(ISUZU)
Thickness
(mm)
Part No.
(ISUZU)
Thickness
(mm)
897116-0290
0.10 897116-0380 0.53
897116-0320
0.20 897116-0390 0.54
897116-0330
0.30 897116-0400 0.55
897116-0340
0.40 897116-0410 0.56
897116-0350
0.50 897116-0420 0.57
897116-0360
0.51 897116-0430 0.58
897116-0370
0.52 897116-0440 0.59
Final inspection
1. Remove the dial gauge, nut and dial gauge holder.
2. Remove the adjustment retaining nut and gasket.
3. Install the original retaining nut, confirm that the pins
are inserted fully into the nozzle, and then hand-tighten
the retaining nut. Then, tighten the original retaining
nut to the specified torque.
Torque: 69 N·m (7.0 kg·m/51 Ib·ft)
040MV017.tif
040LX009.tif
040MV028.tif
040MV014-1.tif
Summary of Contents for 4ja1
