______________________________
IST PROLINE
2.2.5. Dive profile mode
Description of Functions
Dive log mode provides functions for recording various data during a dive when the dive depth
is at least 1.5 meters (5 feet) and the dive time is at least 3 minutes. Data is recorded during
each successive dive, and the log data storage capacity is about 30 hours of dive time (when
the profile's sampling time is set at 30 seconds), or up to 60 log data entries. If the logged dive
time exceeds 30 hours or the number of log data entries exceeds 60, the oldest data is
automatically deleted. (See the section describing profile mode for further description of log
data and profile data.) The logged data is described below.
•
Dive date: Dive date is the date of the dive.
•
Dive time: This is the dive time.
•
Log number: This indicates the number of the currently displayed profile data among all of
the currently recorded data entries.
•
Fraction of oxygen: Mix value was used while diving.
•
Sea/Fresh Icon: This indicates the water setting (sea water/fresh water).
•
Gage mode Icon: In gage mode, the Icon is on.
•
Mode display: This shows Dive profile mode.
•
Battery indicator Icon: This displays the current battery voltage.
•
Profile depth: This indicates a maximum water depth value every sampling time. If depth is
over 99.9m(328ft), this display is ‘---’. In Gage mode, if depth is over 199.9m(656ft), this
display is ‘---’.
•
Nitrox Icon: This Icon is ON when NITROX has been set for MIX1 or MIX2 which was used
while diving. It blinks if the MIX1 and MIX2 setting is the default setting.
Button functions
•
Auto count up dive time: The display automatically goes ahead dive time.
•
A: Press and hold this switch to stop the auto rank increment function for profile data. The
auto rank increment function will resume when you release Switch A. This setting is invalid
______________________________
IST PROLINE
when the last profile data is being displayed.
•
B: Press this switch to move to PC transfer mode, when there is no log and profile data, it
moves to time set mode. but if surface time is less than 10 minutes, the mode moves to time
mode, not PC transfer mode.
•
C: Press this switch to change log number.
(60
→
59
→
58
→…→
2
→
1
→
60
→…
)
•
C: Press and hold this switch to change log number fast scrolling. The oldest data stop.
(60
→
59
→
58
→…→
2
→
1
→
60
→…
)
•
D: When water is detected, the mode moves to dive mode.
•
Auto return: The display automatically returns to time mode when no switches are used for
2-3 minutes.
•
B: Press and hold this switch for 1-2 seconds to move to time mode.
2.2.6. PC transfer mode
If surface time is less than 10 minutes, and when there is no log and profile data, it moves to
time mode, it cannot enter this mode
Description of Functions
•
Battery indicator Icon: This displays the current battery voltage.
•
Mode display: This shows PC transfer mode.
Button functions
•
A: No function
•
B: Press this switch to move to time set mode.
•
C: No function
•
D: No function
•
Enter the mode for 14-15 minutes: move to time mode
•
B: Press and hold this switch for 1-2 seconds to move to time mode.
•
It moves to time mode when the transmission ends.