______________________________
IST PROLINE
<Ascent rate warning>
•
Decompression dive warning: When the NDL is exceeded and the mode is changed to
decompression dive mode, this warning generates. This information is recorded in the dive
log.
<Decompression dive warning>
•
Decompression stop violation warning: When current depth is shallower than the indicated
decompression stop depth, it informs with the display and the alarm. If returning to the
indicated water depth, the display blink stops. This information is recorded in the dive log.
<Decompression stop violation warning>
______________________________
IST PROLINE
•
OLI warning:
When the OLI graph reaches 7 or 8, it informs with the display and the alarm. There are
two types of warnings, as described below.
a.
Graph value = 7: It informs with the display and the alarm
.
This information is not
recorded in the dive log.
b.
Graph value = 8 it informs with the display and the alarm. The blinking display
continues until the graph value reaches 7. This information is recorded in the dive
log.
<OLI warning>
•
PO
2
warning:
The Pressure of oxygen (PO
2
) value is determined based on the set oxygen ratio and the
current depth. When the PO
2
value exceeds a certain value, the information is recorded
in the dive log when the PO
2
warning occurs once. The types of settings and warnings are
described below.
a.When PO
2
=1.4: The warning display blinks and alarm is sounded.
(Case setting MIX1)
b. When PO
2
=1.6 or more: The warning display blinks and an alarm is sounded. The entire
OLI graph blinks. (Case setting MIX1 and MIX2)
<PO
2
warning>