parameter is set to TREMOLO, the switch will turn off or on the
tremolo, or if 2
nd
is activated, the switch will allow tap setting of the
tremolo rate. The LED will show the tremolo is on by blinking at the
set rate. If this parameter is set to PHA+TREM, the switch will turn
on both functions if they are both off, or turn them both off it they
are both on. If only one is on, the switch will turn that function off
and the other one on. If both phaser and tremolo are on, the LED
will display the rate of the phaser, since that is considered the most
typical use of the switch.
b. C/F SWITCH: (CHORUS, FLANGER, or CRS+FLA): Determines
the action of the CHORUS/FLANGER switch and LED. Set to
CHORUS, the switch will turn off or on the chorus, or if 2
nd
is
activated, the switch will allow tap setting of the chorus rate. The
LED will show the chorus is on by blinking at the set rate. If this
parameter is set to FLANGER, the switch will turn off or on the
flanger, or if 2
nd
is activated, the switch will allow tap setting of the
flanger rate. The LED will show the flanger is on by blinking at the
set rate. If this parameter is set to CRS+FLA, the switch will turn on
both functions if they are both off, or turn them both off it they are
both on. If only one is on, the switch will turn that function off and
the other one on. If both chorus and flanger are on, the LED will
display the rate of the chorus, since that is considered the most
typical use of the switch.
M) EXPRESSION PEDAL Function
a. EXP PDL1 (OFF, WAH FREQ, GAIN, DIRECT PAN, TREBLE,
TREBLE FREQ, PHASER RATE, PHASER DEPTH, CRS RATE 1,
CHORUS MIX, FLA RATE 1): Allows you to map the EXP PEDAL
input to the selected parameter. Select OFF if you don’t want the
expression pedal to be able to change any parameters.
b. EXP MIN1 (various): Allows you to set the minimum range of the
expression pedal sweep. The units that appear with this parameter
will change to match the units of the parameter selected above in 1.
c. EXP MAX1 (various): Allows you to set the maximum range of the
expression pedal sweep. The units that appear with this parameter
will change to match the units of the parameter selected above in 1.
d. EXP PDL2 (OFF, WAH FREQ, GAIN, DIRECT PAN, TREBLE,
TREBLE FREQ, PHASER RATE, PHASER DEPTH, CRS RATE 1,
CHORUS MIX, FLA RATE 1): Allows you to map the EXP PEDAL
input to the selected parameter. This parameter exists to allow you
to map the expression pedal to two parameters from the list, for
even greater creative control. Select OFF if you do not want to use.
e. EXP MIN 2 (various): Allows you to set the maximum range of the
expression pedal sweep. The units that appear with this parameter
will change to match the units of the parameter selected above in 4.