20
TROUBLESHOOTING
•
BUTTONS DO NOT WORK
Check the correct positioning of the camera;
• BUTTONS GET STUCK
Apply lubricant to the button. Press the button several times to distribute the lubricant.
N.B.*
Don’t use vaseline grease on the O-ring seals.
We recommend the use of original
ISOTTA
products.
• THE FLASH DO NOT SHOOT IN SYNCRO MODE
Make sure you have inserted the hotshoe contact all the way down and check that
you entered correctly the flash contact.
• TRACES OF SALT ON JOINTS WHILE ASSEMBLY HOUSING
Salty water on the joints: rinse well and wipe the points with Vaseline oil, except for
the optics, which should be cleaned only with special detergents.
• RED LED IS ON
A red LED and acoustic signal on the back of the housing indicates excessive moisture
inside the housing. If this happens underwater, you should get out of water as soon as
possible in respect of security measures and ensure that there were no leaks.
Re-clean and re-install the back and port O-rings. Take the housing underwater
without a camera installed to ensure that the leaking has been corrected.
Summary of Contents for ALPHA 7RIII
Page 2: ...2...
