MEASUREMENT AND ASSEMBLY MANUAL
Instruction validity: as of 1 August 2013
11
of replacement of the roller blind, it is possible to send the used roller blind to ISOTRA for disposal after a new roller blind
has been ordered.
10. MAINTENANCE
It is recommended to carry out regular maintenance of the roller blind every two years. No maintenance activities are
expected to be done by the user, except for fabric cleaning, if necessary:
FABRIC CLEANING
Fabric
Cleaning
SATIN, SATINÉ BLACKOUT, SCREEN NATURE,
SATINÉ METAL, SCR3005
Clean with a brush, or wipe with a cloth damped in a
solution of water and a neutral detergent. Do not scrub by
force.
SOLTIS 92
Wipe with a cloth damped in a solution of water and a
neutral detergent. Do not use alcohol-based stain
removers. Do not scrub by force.
OUTDOOR ROLLER BLIND
– SCREEN LITE
DEFECT
POSSIBLE CAUSE
SOLUTION
Fabric does not roll properly;
fabric side displacement
Uneven fabric thickness
(manufacturing defect of the fabric).
Apply a distance layer (e.g. adhesive
tape) directly onto the winding drum, on
the side opposite to where the fabric is
moving.
Repeat
applying
further
adhesive tape layers until the defect is
completely removed.
Roller blind is not rectangular.
Check if the roller blind structure is not
subjected to deformation and if its
installed in rectangular manner. Check
any unevenness of walls or other
supporting elements which can cause
deformation between two sides of the
structure. Use distancing elements if
necessary.
Roller blind does not draw up
fully
Winding drum axis is disconnected
from the support.
Remove the box and check proper
connection of the winding drum.
Poor adjustment of end switches.
Adjust their position in accordance with
instructions for the motor.
