12B
the focus 1 (0-255). Once the mode has been selected, press the
ENTER
button to setup or
automatically return to the main functions without any change after 10 seconds. To go back
to the previous functions without any change press the
ESC
button.
Adjust Focus 2
Press the
ENTER
button and turn jog wheel up to when the
Adjust Focus 2
is shown
on the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to change
the focus 2 (0-255). Once the mode has been selected, press the
ENTER
button to setup or
automatically return to the main functions without any change after 10 seconds. To go back
to the previous functions without any change press the
ESC
button.
Pan Inversion
Press the
ENTER
button and turn jog wheel up to when the
Pan Inversion
is shown
on the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to select
the (Normal) or (Inversion) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 10
seconds. To go back to the previous functions without any change press the
ESC
button.
Tilt Inversion
Press the
ENTER
button and turn jog wheel up to when the
Tilt Inversion
is shown on
the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to select the
(Normal) or (Inversion) mode. Once the mode has been selected, press the
ENTER
button
to setup or automatically return to the main functions without any change after 10 seconds.
To go back to the previous functions without any change press the
ESC
button.
Auto Test
Press the
ENTER
button and turn jog wheel up to when the
Auto Test
is shown on
the monitor. Pressing
ENTER
button and the display will blink. select option and the unit will
run self-test by built-in program. To go back to the main functions press the
ESC
button
twice.
Manual Test
Press the
ENTER
button and turn jog wheel up to when the
Manual Test
is shown on
the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to select the
(Pan) or (Tilt) or (Shutter) or ……mode. Once the mode has been selected, press the
ENTER
button and use jog wheel to select the 0~255 value. Once the value has been
selected, press the
ENTER
button to setup or automatically return to the main functions
without any change after 10 seconds. To go back to the previous functions without any
change press the
ESC
button.
13B
Lamp Temperature
Press the
ENTER
button and turn jog wheel up to when the
Lamp Temperature
is
shown on the monitor. Pressing
ENTER
button and the ambient temperature of lamp will
show on the monitor. To go back to the main functions press the
ESC
button twice.
Lamp Hours
Press the
ENTER
button and turn jog wheel up to when the
Lamp Hours
is shown on
the monitor. Pressing
ENTER
button and the monitor will show the number of working hours
of the unit. To go back to the main functions press the
ESC
button twice.
Lamp On/Off
Press the
ENTER
button and turn jog wheel up to when the
Lamp On/Off
is shown on
the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to select the
(Lamp on) or (Lamp off) mode. Once the mode has been selected, press the
ENTER
button
to setup or automatically return to the main functions without any change after 10 seconds.
To go back to the previous functions without any change press the
ESC
button.
Lamp On/Power On
Press the
ENTER
button and turn jog wheel up to when the
Lamp On/Power On
is
shown on the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to
select the (on) or (off ) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 10 seconds. To
go back to the previous functions without any change press the
ESC
button.
Software Version
Press the
ENTER
button and turn jog wheel up to when the
Software Version
is
shown on the monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to
select the (A) or (B) or (C) or (D) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change
after 10 seconds. To go back to the previous functions without any change press the
ESC
button.
Reset
Press the
ENTER
button and turn jog wheel up to when the
Reset
is shown on the
monitor. Pressing
ENTER
button and the display will blink. Use jog wheel to select the (Yes)
or (No) mode. select (Yes)
option and all channels of the unit will return to their standard
position. To go back to the main functions press the
ESC
button twice.
