10-
Show Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(show 1) or
(show 2) or
(show 3) or
(show 4) mode. Once the mode has been
selected, press the
ENTER
button to setup or automatically return to the main functions
without any change after 8 seconds. To go back to the functions without any change press
the
MENU
button again.
Show 1 mode - Fixture is placed on the floor. Tilt movement angle 210
°
.
Show 2 mode - Fixture is fixed under ceiling. Tilt movement angle 90
°
.
Show 3 mode - Fixture is placed on the speaker, The spot is always projecting to
the audience
’
s direction; i.e in front of the stage. Pan movement angel ( left to
right to left ): 160
°
. Tilt movement angel: 90
°
( 60
°
above horizon; 30
°
below
horizon.)
Show 4 mode - Fixture is fixed under ceiling. The spot is mainly projecting in front
of the stage. Pan movement angel ( left to right to left ) :160
°
. Tilt movement
angel: 90
°
( vertically, front 75
°
; back 15
°
)
Slave Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(2 light show) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the
MENU
button again.
Blackout Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(yes
blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after
8 seconds. To go back to the functions without any change press the
MENU
button again.
Color Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(split color) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the
MENU
button again.
Pan Inversion
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(pan inversion) mode. Once the mode has been selected, press the
ENTER
button
to setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the
MENU
button again.
Tilt Inversion
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(tilt inversion) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the
MENU
button again.
Dimmer Inversion
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(dimmer inversion) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the
MENU
button again.
Led Display
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the
MENU
button again.
