8F
4.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
press the
ENTER
button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press the
MENU
button. The main functions are showing below:
Lamp on
Lamp off
MENU
Self-Test
Reset
Fixture Hours
DMX512 Address Setting
DMX 512 Address Setting
Press the
MENU
button until the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press the
ENTER
button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the
MENU
button again.
Self-Test
Press the
MENU
button until the
is blinking on the display. Pressing
ENTER
button and the unit will run self-test by built in program. To go back to the functions press the
MENU
button again.
Fixture Hours
Press the
MENU
button until the
is blinking on the display. Pressing
ENTER
button
and the display will show the number of working hours of the unit. To go back to the
functions press the
MENU
button again.
9F
Reset
Press the
MENU
button until the
is blinking on the display. Pressing
ENTER
button
and all channels of the unit will return to their standard position. To go back to the functions
press the
MENU
button again.
4.3 Home Position Adjust
Press
MENU
button for at least 5 seconds into offset mode to adjust the home position,
when you want to adjust gobo and color home position, you should be run
mode
first , the functions are shown below:
Color offset
Press the
MENU
button for at least 5 seconds into offset mode, use
DOWN
and
UP
button
up to when the
is shown on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to adjust the color home position. Once the color has
been selected, press the
ENTER
button to setup or automatically return to the offset
functions without any change press the
MENU
button again, To go back to the main
functions without any change after 8 seconds.
Effect offset
Press the
MENU
button for at least 5 seconds into offset mode, use
DOWN
and
UP
button
up to when the
is shown on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to adjust the effect home position. Once the effect has
been selected, press the
ENTER
button to setup or automatically return to the offset
functions without any change press the
MENU
button again, To go back to the main
functions without any change after 8 seconds.
