background image

4F 

  2. Technical Specification   

Power supply 

-AC 230V 50/60Hz 

-AC 100V 50/60Hz / 120V 60Hz (Only for IF-575 version) 

Lamp 

- MSI 1200W/S / HMI 1200/S K SFc10-4 

HMI 575W & HTI 575W (Osram)or HMQ 575 & HMQ 575/2 (Xenpow)

 

Optical system 

- High efficiency optical system 

- High quality optical lens and dichroic colors 

- Beam angle: 13

°

 

Shutter/Dimmer 

- Blackout, 0~100% smooth dimming and strobe speed variable (1~12 flashes per 

second) 

Movement 

- Pan: 360°   Tilt: 90° 

Color Wheel 

- 8 dichroic colors plus white color   

- Rainbow effect at variable speeds 

Color Temperature 

- Standard 6000K, adjustable 5600K and 3200K 

DMX Channels 

- Standard DMX512 signal addressing and controlled by any universal DMX controller 

 

 

 

 

 

 

Luminous intensity: (HMI 1200W)

 

 

Channel 1 = Shutter   

Channel 2 = Iris 

Channel 3 = Color 

Channel 4 = Color temperature 

Channel 5 = Dimmer 

Channel 6 = Focus   

5F 

 3. Lamp  

 

 

 

Because of its high internal pressure, there might be a risk that the Discharge lamp 

would explode during operation. The lamp emits intense UV radiation which is harmful 

to the eyes and skin. The high luminance of the arc can cause severe damage to the 

retina if looks directly at the lamp. 

MSI 1200W/S / HMI 1200/S K SFc10-4 

IF-575:    HMI 575W & HTI 575W (Osram)or HMQ 575 & HMQ 575/2 (Xenpow)

 

 

1. Always switch off the main supply and never handle the lamp or luminant when it is     

hot. 

2. Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured   

alcohol and wipe it with a lint free cloth before installation. 

3. The lamp generates UV radiation. Never operate the lamp without appropriate shielding. 

4. When burning, the lamp operates at high pressure and there is a slight risk of arc tube 

rupture. The risk increases with age, temperature and improper handling of the lamp. Do 

not use the lamp any longer than its specified life.   

5. Make sure the lamp is located in the center of the reflector for the best spot. 

 

 

 

In case of replacement of the lamp or maintenance, do not open the 

fixture within 15 minutes until the unit cools down after switching off. 

Summary of Contents for FOLL02










Reviews: