SECTION 3: CANOPY MOUNT (SINGLE OR DOUBLE FACE SIGNS)
1. Secure spider plate to junction box. Guide transformer secondary leads through canopy and
connect to sign.
2. Secure canopy to sign and then fasten to spider plate. If an optional security cover will be
utilized, it must be assembled to sign prior to securing the canopy to the sign.
Figure 7: Canopy mount Installation (Top/ Ceiling Mount)
(2) PPH #6-32 x 3/8” long Screws
Canopy to Exit Sign
supplied with Exit sign
SCREW LENGTH IS CRITICAL.
DO NOT SUBSTITUTE AS IT
MAY CAUSE DAMAGE TO
INTERNAL COMPONENTS.
(2) PPH #6-32 x 5/8” long screws
Canopy to Spider Plate Assy.
Supplied with Exit Sign
Canopy
Secure spider plate
assy to J-box
with screws provided
with J-box.DO NOT
OVER TORQUE!
Standard 4 inch J Box
Not supplied with sign.
Spider Plate Assy
Terminate Transformer
secondary wires to Sign
(leads are shown at an
exaggerated length for
clarity. Actual leads are
shorter).
Optional Security Enclosure
Must be installed prior to
securing canopy to sign.
(2) PPH #6-32 x 5/8” long screws
Canopy to Spider Plate Assy
supplied with Exit Sign
(2) PPH #6-32 x 3/8” long Screws
Canopy to Exit Sign
supplied with Exit sign
SCREW LENGTH IS CRITICAL.
DO NOT SUBSTITUTE.
Spider Plate
Assy
Standard 4 inch J Box
Not supplied with sign.
Secure spider plate
assy to J-box
with screws provided
with J-box. DO NOT
OVER TORQUE!
Canopy
Terminate Transformer
secondary wires to Sign.
Figure 8: Canopy mount Installation (Side Mount)
After installation is complete, reapply power and notify the
authority having jurisdiction.
Page 5
Z410138 Rev B