SECTION 1: BASIC FUNCTIONALITY AND FEATURES
Page 2
INSTALLATION INSTRUCTIONS
The Dual Tech 2.0 Hybrid Exit Sign is designed to be mounted to a junction box (supplied by
others). It can be either back, top or side mounted. The single face unit back mounts to a
standard 4” square box. Top or side mount requires the optional canopy and also mounts to
a standard 4” square box.
Figure 1: Standard Junction box dimensional outline
1 ½
4.0
4.0
3 ⅜
3 ⅜
4.78 Between mounting holes
2. Support rear panel on spacers and punch out appropriate knockouts to fit junction box.
Figure 3: Rear Panel Knock Outs
Junction Box Knockouts
Knockout for lead
wires to sign.
Figure 2: Opening the sign
1. Open enclosure and separate panels using a flat blade screw driver (as shown below).
To open the sign insert a flat blade screwdriver
into the 4 slots on the edge and rotate
the blade gently so that the sign snaps
apart. Repeat on all notches before
pulling apart.
Z410138 Rev B