When using electrical equipment, basic safety precautions should always be followed including
the following:
Page 1
Z410138 Rev B
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. DO NOT use outdoors.
2. DO NOT mount near gas or electric heaters.
3. Equipment should be mounted in locations and at heights where it will not be
readily subject to tampering by unauthorized personnel.
4. The use of accessory equipment is not recommended by the manufacturer.
Use of such equipment may cause an unsafe condition.
5. DO NOT use this equipment for other than intended use.
6. Conduct periodic visibility tests in accordance with the applicable installation
code (such as NFPA 101).
7. Supply connections MUST be made inside the junction box.
8. Install using recommended junction box ONLY.
9. Servicing of this equipment should be performed by a qualified service personnel.
10. Install sign indoors only where not exposed to direct unfiltered sunlight, liquid
o
o
spray or temperatures outside of the range of 10 C to 40 C.
11. Before installing unit, disconnect power at breaker panel.
DUAL TECH 2.0 - DTH2 SERIES
DIE CAST ALUMINUM LED EXIT SIGNS
INSTALLATION AND OPERATING
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
CONSERVER LA FICHE D’INSTRUCTION
31 Waterloo Avenue • Berwyn • PA 19312 U•S•A
Telephone: (610) 647-8200 • Fax: (610) 296-8952
IMPORTANT SAFEGUARDS