3
1. Safety notes
This meter has been produced to comply with category II requirements under IEC publication 1010-1
"Safety requirements
for electrical equipment for measuring, monitoring and laboratory use".
The present operating manual gives directions which must be followed and points out precautions which must be taken if the
meter is to be used safely and kept in a safe state.
Terms used in the operating manual.
"Important"
identifies conditions or operations in which there is a possibility of the multimeter or other equipment being
damaged.
"Warning"
identifies conditions or operations in which there is a possible risk of injury or death.
Markings on the unit.
Attention
— Follow the operating instructions.
Danger
— Dangerous voltages may occur at these connections
.
Symbol for double insulation
Symbols in operating manual
This symbol indicates important information.
Fuse
Battery
WARNING :
To avoid hazards or the risk of electric shock or of the multimeter being damaged, voltages which may
exceed which may exceed 600Vd.c. or 600Vrms should not be measured. Never apply voltages of more
than 600Vd.c. or 600Vrms to earth to the "COM" input terminal.
Summary of Contents for IDM101
