13
Auto Hold
˙
Press the A-HOLD button to start the auto hold mode, and
press again to exit.
˙
In this mode, the meter show the indication “
HOLD
” on the
display.
˙
When the difference is bigger (
> 50d
) than hold data, and it
is also
stable
. Then the meter will automatically hold a new
data on the display.
˙
When the reading is smaller the limit, the auto hold mode is
not working.
Function Limit
V <
0.1V
mV <
1mV
others No
Limit
Relative
Δ
˙
Press the REL
Δ
button to start relative mode. The meter
remembers the presently reading as reference and shows
the indication “
Δ
” on the display.
˙
In this mode, the meter deducts the reference from each
reading, and shows the result on the display.
˙
Press the REL
Δ
button to select display (Reference or
Result). The indication “
Δ
” blinks on the display when it shows
the result.
˙
Press the REL
Δ
button > 1sec to exit this mode.
Maximum / Minimum / Average
˙
When blink cursor of menu is MAX / MIN / AVG, press the
ENTER button to start MAX / MIN / AVG mode.
˙
In this mode, the meter records each data to compare the
maximum and minimum. And calculate the average.
˙
You can move the blink cursor of menu to select what was
showed on the display.
˙
Press the CANCEL button to exit this mode.