14
Store / Recall
˙
When blink cursor of menu is STORE, press the ENTER
button to store the presently reading to memory.
˙
The meter can store maximum 100 data in the memory.
˙
You can enter the recall mode to review the stored data.
˙
When blink cursor of menu is RECALL, press the ENTER
button to start recall mode.
˙
In the recall mode, you can press the UP or DOWN button to
review the stored data. When press it > 1sec, you can fast
search.
˙
Press the CANCEL button to exit this mode.
˙
To clear all data of stored function in memory, see the
Power
On Options
.
Auto Power Off
˙
If there is no any action in the meter, then the meter will
automatically turn off to save the power of batteries.
˙
The APO time is default 20 minutes.
˙
When the meter was power on, the APO was set to default.
To disable the APO, see the
Power On Options
.
Auto Backlight
˙
The backlight is automatically turned on at dark
environment.
˙
When the meter was power on, the auto backlight was set to
default. To disable the automatic, and enable / disable the
backlight, see the
Power On Options
.
Buzzer
˙
Equip 2kHz tone buzzer.
˙
Valid button press: Beep once
˙
Invalid button press: Beep twice
˙
To enable / disable the buzzer, see the
Power On Options
.