Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • sales@islandaire.com • (800)-886-2759
31
Maintenance
Installing Air Discharge
Package
This original package allows for distribution of air into
an adjacent zone requiring a controlled temperature.
This assembly will discharge the conditioned air to
either the right or left depending upon which end the
end cap is placed. Total overall length of duct kit not to
exceed 10 feet.
Air Intake Filters
(2 per) Part Number 6080067
When the air conditioner is operating, indoor air is fil-
tered and refiltered continuously trapping airborne dirt
and dust in the washable filter. The air intake filters
are removable for easy cleaning. A clean filter helps
remove dust, lint, and other particles from the air and
is important for best cooling and operating efficiency.
Check the filter every two weeks to see whether it
needs cleaning.
1. Turn unit off.
2. Remove each air filter by grasping the top edge of
the filter frame and pulling each one up and out of
the unit.
3. Wash in hot soapy water, rinse and shake dry.
4. Replace the filter, with the front of the filter toward
you.
5. To dry the filter thoroughly, run your unit for a few
minutes in fan mode.
AIR INTAKE
FILTERS
Figure 34
Filter Removal
Routine Maintenance
Keep air intake filter clean.
• Coils should be inspected periodically for build-up
of lint, dirt, leaves, other debris, and bent fins.
• Clean coils with a soft brush and compressed air or
vacuum. Do NOT use sharp objects to clean coils.
• The fan motors are permanently lubricated and do
not require servicing.
• In areas of heavy snow and ice accumulation,
snow and ice should not be permitted to accu-
mulate against the unit. As soon as practical after
such inclement weather, clean snow and ice from
around the unit as much as possible.
