manualshive.com logo in svg

Isilon Systems IQ S Series, Field Replacement Manual

The Isilon Systems IQ S Series is a high-performance storage solution designed for enterprises. For easy maintenance, a comprehensive Field Replacement Manual is available for download free of charge at manualshive.com, providing step-by-step instructions for quick and hassle-free troubleshooting.

Share
Download
background image

shutdown -p now

6. Unplug both power cables from the back panel of the node.

7. Remove the top panel from the node.

For more information, see 

Removing the node top panel

 on page 35.

8. Remove the air baffle.

For more information, see 

Removing the air baffle

 on page 39.

9. Locate the DIMM module you want to replace.

2

1

3

1  Air baffle

3  DIMM modules

2  PCIe riser card support bracket

Figure 9. DIMM module location

10. Gently press the two DIMM socket arms on either side of the DIMM module to release the DIMM module from the

socket.

DIMM modules

24

©

 2010 Isilon Systems, Inc.

Summary of Contents for IQ S Series













































Reviews:

No comments

Related manuals for IQ S Series

Brands by name

Popular brands

Load more brands