ITA Series – Table Top Precision Weighing Balance
ITA Series – Table Top Precision Weighing Balance
3 CONTROLS & FUNCTIONS
SYMBOL
NAME
FUNCTION
Located on
right side
Power Switch
· To power on and off the machine.
of scale
SHIFT
· Recall Accumulated weight.
· Right shift the selected digit during
cal or other setup modes.
· Manual Accumulation, Add weight
to memory.
UP
· Increment digit by 1 of selected digit.
Ex change 0 to 1 to 2 to 3….9 .
MODE
· Switch between weighing units.
· Tare / Zero the weight kept on the
pan.
· Zero the weight kept on the pan.
TARE
· Enter Key – Accept the selected
setting and exit from setting mode.
· External Calibration of Scale.
STEP
DISPLAY
PROCEDURE
1.
2.
3.
4.
5.
6.
Press and hold the tare button
while switching on the scale. You
will see CAL-0 on the display for a
second and then some counts will
be displayed.
Press the mode button once, you
will see Load on the display.
Keep a known weight on the pan
for eg. 200 gm and press mode
button. The display will show
200.000 or the last calibration
weight value.
Press the mode button, you will see
CAL-F for a second and then some
counts will be displayed.
Press the mode button, you will see
UNLOAD on the display.
Lift the weight from the pan and
press mode button. The calibration
is complete and the machine
should restart itself.
6.2 EXTERNAL USER CALIBRATION
10
3
