Chapter 4 SYSTEM SETTING MENU
4-12
IL-2000SA Service Manual
4.9 LABEL SETTING
Set the printing conditions for each label
number.
<Label No.>
Enter a desired label number (1-99) and
touch the Label Spec. field.
<Thermal paper type>
Select the desired paper type:
- Receipt
- Standard label (monochrome label)
- Incapable for two color label
<Label gap>
Set the label gap in units of 0.1mm. (Initial value: 2.0 mm)
<Preprint Feed>
Set the amount in the unit of 0.1mm. for the preprint feed. (Initial value: 7.5 mm)
<Print direction>
Normal direction
Reverse direction
<Back Feed>
Used with [No].
IL-2000SA cannot be used with the back feeding ”Yes”. It
is prepared in consideration of a future model
development.
<Label Sensor>
Used with “Label Sensor”.
Ä
Set as [No use] when the receipt is used and too thin to detect. The receipt end cannot be
detected.
<Sensor Distance>
Set the print side line to be 7.5 mm from the label bottom.
<Print Speed>
Set [80/sec] or [100/sec].
DISCONTINUED
Summary of Contents for IL-2000SA
Page 10: ...D I S C O N T I N U E D ...
Page 32: ...D I S C O N T I N U E D ...
Page 76: ...D I S C O N T I N U E D ...