manualshive.com logo in svg

ISHIDA AC-4000H, Service Manual

Share
Download
ISHIDA AC-4000H Service Manual Download Page 85

Chapter 4   Setup Mode

4-43

AC-4000H Service Manual    No. 085-7323-08

THECHNICAL REPORT : AC-4000H ONLINE B10-09 FUNCTION

When there s a communication problem in AC-4000H online specification (TCP/IP), please refer the
following information order to settle the problem.

B10-09-02 IP ADDRESS
B10-09-03 MAC ADDRESS
B10-09-04 SUBNET MASK
B10-09-05 GATEWAY ADDRESS

B10-09 function
1) When turn on the power (Reset) in ONLINE: set value will be displayed.

B10-09-02 IP ADDRESS = B10-01 IP ADRESS
B10-09-03 MAC ADDRESS = B10-07 MAC ADRESS
B10-09-04 SUBNET MASK = B10-03 SUBNET MASK
B10-09-05 GATEWAY ADDRESS = B10-02 GATEWAY ADRESS

2) When turn on the power (Reset) in OFFLINE:

B10-09-02 IP ADDRESS = default setting (000, 000, 027, 254) will be displayed.
B10-09-03 MAC ADDRESS = default setting (0000, 1bfe, 1001) will be displayed.
B10-09-04 SUBNET MASK = default setting (000, 000, 027, 254) will be displayed.
B10-09-05 GATEWAY ADDRESS = default setting (000, 000, 027, 254) will be displayed.

When default setting is displayed, it means the scale is in OFFLINE.

Please note these B10-09-XX NO. shows the information at “power (Reset) on” so scale dose n otcheck
communication status (connect / not connect) in real time.

When communication error (not connect) occurs, please check if the set value is displayed or not in
B10-09-02 and B10-09-04.
If set value is not displayed, the scale is in OFFLINE. In this case, please turn ON the scale again (or
Reset) and set the scale ONLINE, then check the communication.

If there is any problem or question, please do not hesitate to ask the address of
<[email protected]>.

Summary of Contents for AC-4000H


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands