SIRIO
Sezione
On this page you can see all the configuration
parameters of the F9000 Mobile app.
If you want to change these parameters you have to
push the «gear» button.
By default the app understand if the linked device
is an V1 or V2.
In that example, the F9000 Mobile Validator has a
V1 firmware.
Set the IP Address and Port defined on the Ethernet
Gateway (see its configuration) if you use the
device in your network.
Otherwise you have to set a public IP Address and
Port reachable from the outside of your network.
You can ask it to your network administrator.
Push the button «major» to search the F9000
Mobile Validator.
Summary of Contents for F9000 ON/UP
Page 1: ...USER MANUAL F9000 MOBILE VALIDATOR Eng 01 ...
Page 2: ......
