ICV 4030
– CNC machine with CAN control
This manual contains the operating instructions for the ICV 4030-Router (CAN machine
control system) ans its following components :
- housing incl. linear drive units with brush-type DC motors
- control electronics : servo amplifier IMD10 with CAN-bus interface, isel system module
ISM10 with safety circuit module and CAN-I/O-module 16/16, power supply
48VDC/500W as operating voltage for the servo amplifiers
- integrated control PC ISR20 with built-in CAN interface PCI-CAN
- ProNC, RemoteWin, and isyCAM2.5 software
isel
- machines and controllers are concurrent with CE norms and marked accordingly.
Start-up of all other machine parts or components, for which CE safety regulations apply,
is prohibited until all respective requests are met.
isel
Germany AG
as the manufacturer cannot take over guarantee if you change the
machine in any way.
The EMC-test is valid only for the machine´s original configuration ex works.
Basic knowledge in CNC-technology and PC application, such as Windows2000 or
Windows XP are a prerequisite for your work with the ICV 4030.
Please follow the instructions of this manual so that you can
install the system properly,
work safely, quickly, and efficiently,
keep away danger from persons,
and thus tap the full machine´s potential.
For starting to work with this machine we recommend you to carry out the machining
exercises of the ProNC and RemoteWin software .
We wish you a lot of success and pleasure for your work with the ICV 4030.
