ICV 4030 - CNC-Compact-Machine with CAN Controller
Page - 7
5.1.4 Bearbeitungsmaschine
5.1.5 Machine tool
The collet chuck (4) of the standard machine tool can hold different tools with a shank
diameter up to max. 6,35mm (standard 3 mm, other Ø refer to accessories).
Use two spanners size 22 for changing the collet chuck . Power supply for the machine tool
will be enabled by the software.
The speed of revolutions can be set manually by the thumb wheel (1).
To dismount the machine tool, turn off the main switch of the ICV 4030, disconnect the line
cord from the distribution box, release the locking screw (2) and take the machine tool out
of its fixture.
To dismount the machine tool together with its fixture, turn off the main switch, disconnect
the line cord from the distribution box, release the outer screws (3) (just release, not
unscrew) and take out downwards the machine with its fixture and the T-nuts.
Many other tools, measuring instruments (laser) or other devices can be mounted onto the
T-slot plate of the Z-axis by using the appropriate fixtures.
Use the distribution box of the Z-axis for electrical connection.
When you mount the machine tool or other tools, you have to adjust the fixture again
parallel to the XY-plane.
