Isel ICP 2015, Operating And Maintaining Instruction

Page: 3 / 28

Î
isel-
ʜ“«>VÌʵՈ«“i˜ÌÊÊ*
This manual includes the instructions for all machines of the ICP type.
The ICP is provided in three different system configurations. However, this listing also specifies
which part of the instructions is relevant for you. This applies also to the chapters.
£° / iÊ*Ê>ÃÊ>ÊVœ“«œ˜i˜Ì]ÊÌÞ«iÊ£
The case is supplied including the driving axes, without electronics, without software,
without tooling machine. With this system configuration, you can employ and connect
your own controller electronics. A tooling machine is also freely selectable.
Ó° / iÊ*Ê>ÃÊ>ʓ>V ˆ˜i]ÊÌÞ«iÊÓ
In addition to type 1, this system configuration includes an ˆÃi l controller for the linear
axes. It contains a safety circuit and some optional inputs/outputs (24 V and/or 230 V).
For this purpose, you receive the ˆÃi l HPDOWN software and the I5DRV machine driver.
The tooling machine is freely selectable.
ΰ / iÊ*Ê>ÃÊ>ÊVœ“«>VÌÊiµÕˆ«“i˜Ì]ÊÌÞ«iÊÎ
The complete installation (mechanics, electronics, tooling machine and software
(ISY-CAM + REMOTE, I5DRV)) is immediately ready after commissioning.
At every expansion level, the ICP is a compact machine that offers an abundance of
possibilities for processing work pieces.
As a prerequisite for your work with the ICP and depending on the implementation, you
require basic knowledge in CNC engineering and PC application, a computer, a mains
socket, and some creativity.
*i>Ãi]ÊVœ˜Ãˆ`iÀÊÌ iÃiÊà œÀÌʈ˜ÃÌÀÕV̈œ˜ÃÊ̜
• properly commission the equipment,
• fast, safely, and effectively work,
• keep away dangers of persons,
• and thus exploit the full potential.
To get acquainted to work with this machine, we recommend that you carry out the
processing example which is appended to these instructions (for the ICP with the HPDOWN,
REMOTE, and/or ISY software).
We wish you a lot of success. Enjoy your future working with the ICP.