CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 38
9.2.5 Lubrication of the Z axis
EuroMod 30/45/65: Grease nipple at the Z
axis
At the Z axis (vertically mounted at the slide
panel of the X axis) there is one black or
white plastic stopper at the lower side of
linear unit.
It can be reached from the operating
position when the door / cover is open.
Under the plastic stopper
there is the grease nipple
for the Z axis central lubrication.
Pull the stopper out and lubricate the axis:
Put the grease gun over the viewable and
accessable grease nipple and press the
grease gun.
When finished push the stopper back into its
original position.
