47
OPERATION
EXTERNAL AUXILIARY HYDRAULICS
(Accessory)
Auxiliary hydraulics can be Dealer installed to operate
implement requiring external hydraulics source for opera-
tion. Kits are available two-spool (two hydraulic circuit)
Fig. 54 & 55: Control lever, 1, controls implement raising
or lowering when first set of remote couplers are used.
Control lever, 2, controls implement when second set of
remote couplers are used (two-spool kit only).
Control lever s are spring-loaded to center neutral position
from normal raise or lower positions.
Remote couplers are located at rear of the tractor, above
three-point hitch. Coupler set, 3, corresponds with control
lever, 1, coupler set, 4, with control lever, 2.
Implement hoses must be connected to each coupler set
so when respective control lever is pulled rearward imple-
ment raises and when pushed forward implement lowers.
Male coupler tips (on implement hoses) must be compati-
ble with tractor couplers and must also be inserted fully
and locked into tractor couplers to operate correctly.
CAUTION: Always lower implement to
ground, shut off engine and relieve system
pressure (by operating control levers with
engine off) before connecting or disconnect-
ing implement hoses.
FIG. 54
FIG. 55
