22
TXG23
INSTRUMENT PANEL
FIG. 9 & 10: Arrangement of gauges. Control switches
and indicators located in instrument panel. Items are
detailed in the descriptions that follow:
NOTE: Instrumental panel and switches may vary slightly
from those shown.
1. Fuel Gauge
2. Combination Switch
[Headlamp Switch, Turn Signal Switch]
3. Battery Charge Lamp
4. Engine Oil Pressure Warning Lamp
5. Coolant Temperature Warning Lamp
6. Turn Indicator Lamp
7. Hour Meter
8. Main Switch
9. Hazard Signal Switch
10. Small Lamp Switch
11. High Beam Light Monitor
12. Trailer Monitor
13. Horn Switch
MAIN SWITCH
FIG. 11: Main Switch, 1, has the four following positions:
$
:OFF ....
Engine and all electrical circuits off Key
can be removed.
O
:ON ......
Power supplied to all circuits. Normal op-
erating position.
c
:START
.
Starter activated. This position spring-
return to "ON"
G
:GLOW
.
(Turned to left)Energizes glow plugs to
preheat the combustion chambers and
assist starting. Spring-return to "OFF".
NOTE:
The main switch must be turned to "ON" before
any circuits will operate .The clutch pedal must
be depressed before the engine is started.
IMPORTANT:
When the main switch is selected to
"GLOW" position, the engine combus-
tion chambers will be preheated and
allow a cold engine to be started after
several seconds.
FIG. 9
FIG. 11
FIG. 10
