II. ATTACHING AND DETACHING MOWER DECK
69
d. Place the mower deck underneath the machine.
e. Insert the discharge cover (2) of mower deck into
the chute (10) of machine.
f. Install the rear link (4) into the mower deck with
pin.
g. Install drive shaft (11) into the machine.
h. Install the front link (5) into the machine and the
mower deck.
Attach the joint cover, (12) (13).
i. Pull the lift lever (1) to raise the mower deck.
j. Set the gauge wheels (3) of the mower deck
straightly.
IMPORTANT: • When installing and removing the
mower deck, turn forward the hight
adjust dial (9) fully to lower the mower
deck.
•
After installing the mower deck, be
sure that the ground clearance of the
bottom surface of the mower deck is
135mm.
•
When the mower deck is leaning to
forward or backward, adjust length of
the front link (5).
In case of leaning to forward:
Make length of the front link (5) shorter
In case of leaning to backward :
Make length of the front link (5) longer
450±2
2. DETACHING THE MOWER DECK
Detach the mower deck in reverse order of attaching:
Remove the drive shaft first and then the mower deck.
CAUTION: Be sure to disconnect the
universal joint on the PTO shaft of the
machine.
IMPORTANT: Be sure to keep the removed parts.