Iseki SCMA48F, Introduction Manual, Page: 10 / 52

SFH220 & SFH240 FRONT MOWER SERVICE MANUAL
10
(4) Belt warning lable
(Code No. 8595-901-006-0)
WARNING: RISK OF ENTANGLEMENT
Stay clear of the belt while it is running.
(5) Maintenance label
(Code No. 1593-901-015-0)
Shut down the engine and remove the starter key before
performing maintenance or repair work.
・
Maintenance of the caution labels
- The labels should always be clearly seen, that is,
nothing should obscure them.
- When they have become dirty, wash them with
soapy water and wipe off with soft cloth.
- If any of them are torn or lost, order new labels from
your dealer.
- A new label should be placed in the same place
where the old one was located.
- When sticking on a new label, clean the place to
enable the label to stick and squeeze out all air
bubbles trapped under it.
- When replacing a part with a caution label stuck on,
a new caution label should also be ordered and in-
stalled.
(1) Danger label
(Code No. 2500-901-014-3)
WARNING: RISK OF INJURY
Stay clear of the mower blades while the engine is run-
ning.
(2) Hot-part warning lable
(Code No. 8595-901-007-0)
WARNING: HOT SURFACES, RISK OF BURNS ON
HANDS AND FINGERS
Stay clear of the heated parts until they cool down suf-
ficiently.
(3) PTO label
(Code No. 8654-901-002-0)
WARNING: RISK OF ENTANGLEMENT
Stay clear of the PTO shaft while the engine is running.