If a channel is switched off, the values of V
meas
and I
meas
are gray.
If a channel is in constant voltage regulation, V
meas
value is white and I
meas
value is gray
If a channel is in constant current regulation, V
meas
value is grey and I
meas
value is white
The channel row which is slightly brighter is the marked channel by the rotary encoder. Turning the rotary encoder
counter-clockwise will mark the channel above the current channel and turning clockwise will mark the channel below the
current channel.
3.2.2 Menu Screen
By pressing the left button in Main screen, the display will switch to the menu screen, that looks similar to the image
below:
The menu screen shows menu entries to set up behavior and check information of the device hardware.
To enter a menu entry, the user has to mark an entry by turning rotary encoder and then pressing the rotary encoder
button. The selected entry is then shown in the menu path.
back to Main screen by pressing left
button
menu entry list
back to menu screen
menu path
subentries
NHS – NIM standard High Voltage Power Supply | Last changed on: 01.10.2018 |
www.iseg-hv.com
9/20
