3 Handling
3.1 Connection
The supply voltages are connected to the module via the NIM-connector on the rear side of the module. An USB
connector and two 3,5mm audio jack connectors for the CAN interface are located on the front panel. The second CAN
connector can be used to daisy-chain several NHS modules.
3.2 Front Panel Control
NHS – NIM standard High Voltage Power Supply | Last changed on: 01.10.2018 |
www.iseg-hv.com
7/20
Context sensitive
buttons left and right for navigation inside the menus
Display
shows monitor and control values
Rotary encoder
with push button to navigate in menu and set values
LED „OK“
signals condition of the corresponding channel
LED „HV ON“
signals a measured output voltage at the corresponding channel
On/Off switches
to turn the corresponding channel on or off
Hardware limit
set screws V
max
and I
max
to set the maximum output voltage or current
relatively to the absolute maximum values of the channel (V
nom
/ I
nom
)
USB
and
Safety Loop
connector
CAN
connectors
Single channel Inhibit
connector
