iseg HPS 300 W series, Operator'S Manual

Page: 29 / 35

S p e z i a l e l e k t r o n i k G m b H
iseg Spezialelektronik GmbH Email: sales@iseg-hv.de Tel ++ 49 (0) 351 / 26 996 - 0
Bautzner Landstr. 23 http://www.iseg-hv.de Fax ++ 49 (0) 351 / 26 996 - 21
D - 01454 Radeberg / Rossendorf 21
ModuleStatus (read access)
:READ:MODule:STATus?
Bit15 Bit14 Bit13 Bit12 Bit11 Bit10 Bit9 Bit8
isKILena isTEMPgd isSPLYgd isMODgd isEVNTact isSFLPgd isnoRAMP isnoSERR
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
res res res isSrvc res res res isADJ
The status bits as there are IsTemperatureGood, IsSupplyGood, IsModuleGood, IsEventActive, Is-
SafetyLoopGood, IsNoRamp and IsNoSumError indicate the single status for the complete module.
Bit Name Bit is 1 Bit is 0
isKILena IsKillEnable Module is in state Kill enable Module is in state Kill disable
isTEMPgd IsTemperatureGood
Module Temperature < 55 °C Module temperature > 55°C
High voltage is turned off
isSPLYgd IsSupplyGood Power Supply is good Power Supply is not good
isMODgd IsModuleGood Module status is good Module status bad
isEVNTact IsEventActive At least one masked Event is active No masked Event is active
isSFLPgd IsSafetyLoopGood Safety Loop is closed Safety Loop is open
isnoRAMP IsNoRamp All channels stable, no ramp active. At least one channel is ramping
isnoSERR IsNoSumError No sum error Sum error active
isSrvc IsServiceNeeded
Hardware failure detected:
consult manufacturer No Hardware failure detected
isADJ IsFineAdjustment Adjustment is on Adjustment is off
Res Reserved