9.2. Channel Event status (read access)
:READ:CHAN
nel
:EV
ent
:STAT
us
?
UI2
Bit15
Bit14
Bit13
Bit12
Bit11
Bit10
Bit09
Bit08
Event Voltage
Limit
Event Current
Limit
Event Current
Trip
Event External
Inhibit
Event Voltage
Bounds
Event Current
Bounds
Reserved
Reserved
Bit07
Bit06
Bit05
Bit04
Bit03
Bit02
Bit01
Bit00
Event
Constant
Voltage
Event
Constant
Current
Event
Emergency
Off
Event End Of
Voltage Ramp
Event On To
Off
Event Input
Error
Reserved
Reserved
Status Bit
Description
Event Voltage Limit
Hardware voltage limit has been exceeded
Event Current Limit
Hardware current limit has been exceeded
Event Current Trip
Trip is set when Voltage or Current limit or I
set
has been exceeded (when KillEnable=1)
Event External Inhibit
external Inhibit
Event Voltage Bounds
Voltage out of bounds
Event Current Bounds
Current out of bounds
Event Constant Voltage
Voltage control
Event Constant Current
Current control
Event Emergency Off
Emergency off
Event End Of Voltage Ramp
End of ramp
Event On To Off
Change from state "On" to "Off"
Event Input Error
Input Error
An event bit is permanently set if the status bit is 1 or is changing to 1. Different to the status bit an event bit isn't automatically
reset. A reset has to be done by the user by writing an 1 to this event bit.
EHQ High Voltage Power Supply series | Last changed on: 11.05.2020 |
www.iseg-hv.com
32/46
