ise smart connect KNX Hue
Application example Comfort solution in the living environment
Order No. 1-0002-003
Product Manual Page 8 (60)
2.2
Comfort solution in the living environment
Philips Hue offers you wireless digital home lighting, allowing you to amplify or complement your exist-
ing room lighting quickly and flexibly at any time.
All you need is an E27 or GU 10 base for replacing a common light bulb or halogen lamp. The Light
Strips require even less (just a socket outlet). This enables you to implement the following Comfort so-
lutions with minimal installation effort.
2.2.1
Door contact controls room lighting
In this application, a door contact connects with the KNX to influence the light scene in the rooms in
question.
If the door is opened, the rooms become a visual unit. The ise smart connect KNX Hue enables the use
of the same light scene in both rooms.
If the door is closed, the ise smart connect KNX Hue cancels this connection. Both rooms can be lit
independently of one another again.
Is the door open?
The same light scene is used in both rooms.
Is the door closed?
Each room can be lit differently (again).
Note: To use light scenes and room groups, you need optional logic mod-
ules which ensure the same light scene and restore the previous light scene
after termination.
KNX-TP
bus line
IP data net-
work Ether-
net
ise smart
connect
KNX Hue
KNX sensor reports:
Sliding door between
living and dining areas
closed
.
ise smart connect
KNX Hue Converts
KNX commands into
Hue commands (IP).
4
The lighting is disconnected
Different scenes can be
used in the living and dining
areas.
Door contact
