GLS Sampler
2-14
procedure and check the delivered sample
volume. Calibration may improve the GLS’s
volume accuracy.
2.5 Storing a Program
GLS is shipped with default program settings
as its stored program. You can overwrite the
stored program settings with your own program
by using the Program Store function.
To store a program:
1. Modify the current program using the
standard programming.
2.
Press
while in the
Standby state. The GLS displays
“PROGRAM STORED” for four seconds.
The current program settings are now saved in
the GLS memory as the Stored Program. In the
field, recall and run the program with the
One-button programming procedure.
Note
The stored program settings are held in the sampler’s
memory until the software is updated or the GLS is
re-initialized. Either of these actions will restore the
factory default program settings.
2.6 Setting the Time and Date
Should it become necessary to set the time or
date, do the following:
1. From the standby state, press the Arrow
button until the time and date is blinking.
Summary of Contents for GLS
Page 2: ......
