Section 1 Installation
1-7
4.
Power Packs Only
- Route the AC line cord
though the center section’s Tubing/Cable
port.
Note
If you use a battery to power the GLS, always install a
fully charged one before running a program.
Note
Refer to Isco’s Power Products Guide, P/N
60-9003-092, for a complete description of each power
source.
1.8 Suction Line and Strainer
The suction line carries the liquid from the
sampling point to the GLS pump tubing. The
GLS is designed to use:
•
1
⁄
4
-inch (6 mm) I.D. vinyl tubing
•
3
⁄
8
-inch (9 mm) I.D. vinyl tubing
•
3
⁄
8
-inch (9 mm) I.D. Teflon® tubing with a
protective polyethylene jacket
The strainer reduces the possibility of debris
plugging the suction line. Types available are:
• CPVC body (
3
⁄
8
-inch I.D. only)
• Stainless Steel (
1
⁄
4
- and
3
⁄
8
-inch I.D.)
Your application will dictate the best
combination of suction line and strainer.
To prepare the suction line and strainer:
1. Cut the suction line to the shortest feasible
length.
Summary of Contents for GLS
Page 2: ......
