ISCO 6700SR, Instruction Manual, Page: 20 / 190

6700SR Refrigerated Sampler
2
You can also retrieve the readings and reports so that the informa-
tion may be processed on a personal computer. Readings and re-
ports may be collected with a computer running Isco’s Flowlink™
software. Flowlink can download the information through a direct
connection, a modem connection (when the sampler is equipped
with the optional dial-out modem), or from a 581 Rapid Transfer
Device (RTD). The RTD is a quick and simple way to transfer the
data from the field to your computer. Reports are easily collected
with Isco’s Samplink software.
About this Manual
This manual contains the information you’ll need to program, oper-
ate, install and maintain a 6700SR refrigerated sampler. There are
six chapters and five appendices:
• Chapter 1, Introduction, lists the features available with the
6700SR refrigerated sampler.
• Chapter 2, Programming, shows how to program the sampler.
• Chapter 3, Operation, provides installation guidelines and in-
structions for running a sampling program.
• Chapter 4, Maintenance, covers the basic maintenance re-
quired to keep your sampler in top operation condition.
• Chapter 5, Reference, explains the advanced features and how
to use them.
• Chapter 6, Software Options, explains specialized software fea-
tures that can be enabled for use.
The appendices are:
• Appendix A, Menu Charts
• Appendix B, Material Safety Data Sheets
• Appendix C, General Safety Procedures
• Appendix D, Replacement Parts
• Appendix E, Accessories List
Pump Requirements
The pump requires a pump tube made specifically for the 6700
sampler. These pump tubes are easily recognized by their blue
alignment collars. The 6700 pump tube is different from other
types of tubing, including the pump tubes for Isco’s earlier model
samplers, such as the 3700 Series. Other types of pump tubing will
not work in the 6700 pump. Refer to Replacing the Pump Tube on
page 70.
Getting Help
If you need help, have any questions, or think your sampler re-
quires repair, contact Isco’s Customer Service Department.
Isco Customer Service Department
Isco, Inc.
P.O. Box 82531
Lincoln, NE 68501
Telephone:
Toll free: (800) 228-4373
Outside USA, Canada, or Mexico: (402) 464-0231
FAX:(402) 465-3022
Tip
You may find two sections in this
manual most helpful. Chapter 2,
Programming, shows you how to
program the sampler, and Chapter
5,
Reference, explains the features.
It includes discussions on these key
topics.
• Distribution
• Pacing
• Start Times
• Sampler Enable
• Rinses and Retries
• Memory