ISC RP074, General Instructions For Use

Page: 17 / 68

17 RP07X Tandem Trolley Series: Issue E March 2021
English
A Zippey Nomenclature
1 Part Code
2
Fully read and understand User Instruction Manual
3 EN Standard
4 Frame
5 Endstop
6 Minimum Breaking Strength
7
Gate
8 Manufacturers Identification
9 Attachment Eye
10 Branding
11 Rope Diameter
12
Wheel
13 Endstop Screw
14 Bearing indication markings
15 Serial Number
16 CE Mark
B Care and Maintenance
C Zippey Use
1 Pull down latch to open gate and place on wire
2
Attach either a karabiner or textile sling into attachment eye
3 Endstops MUST be fitted
4 Ensure compatibility between Zippey and chosen braking system
5 Ensure braking system is correctly positioned to avoid displacement of Zippey on impact
6 To maximise the lifespan of any trolley (of any brand), be sure to use a cable of better quality
(smoother construction). This will result in less damage being caused to the trolley bearings in use
D Zippey Misuse
1 Do not attach a karabiner through the gate
2 Do not use as a zip line trolley without Endstops
3
Do not allow the karabiner to trail on the line
E Pre-Use check
1 Check Endstops for cracks
2 Ensure that the screws are present and tight
3
Check that wheels rotate freely. *Note that the rubber seals on sealed bearing models will create
some drag when testing by hand. This is normal, the bearings should still feel smooth
4 Check that the latch and gate return by themselves, back to the locked position
5 Check for sharp edges and burrs around the attachment eye. Slings should also be checked
6 Check the security of any accessories that are fitted
F ZipSpeed Nomenclature
1 Minimum Breaking Strength
2 Maximum Rope Diameter
3 Frame
4
Bumper
5 Bearing Indication markings
6 Redundancy Axle with wheel tread diameter identifier