![background image](http://html1.mh-extra.com/html/isc/gasbadge-plus-3-0/gasbadge-plus-3-0_manual_2092319014.webp)
14
INDUSTRIAL SCIENTIFIC
Revision 5 (p/n: 17120932)
Actions Available from the Bump Overdue Alarm Screen(TCM)
Action Response
Mode button press
Go to Bump Test Interval screen
Enter button press
Toggle value between 0 and 1. (Default is
“0” = Bump Overdue Alarm disabled
30 second timeout
Go to Gas Monitoring screen.
Bump Testing
IMPORTANT
:
A function or “bump” test, using a known concentration of
calibration gas, should be performed periodically based on instrument use,
exposure to gas, and environmental conditions. The frequency is best determined
by company policy or local regulatory agencies. If an instrument fails a function
or “bump” test, or, if it is dropped, submerged, or appears damaged, a full
calibration is recommended. The safest approach is to perform a function or
“bump” test prior to each day’s use. Industrial Scientific is not responsible for
establishing customer safety practices and policies.