iES10G(F) User Manual
iS5 Communications Inc.
78
[PortNumber]
hybrid-link untag
[UntaggedVID]
tag
[TaggedVID List]
VLAN by trunk group
hybrid-link untag 4 tag 3,6,8
or
switch(vlan)# vlan 8021q aggreator 3
hybrid-link untag 5 tag 6-8
show vlan
[VID]
or
show vlan
V
Show VLAN information
switch(vlan)#show vlan 23
6.6
Commands Set List—Spanning Tree command set
iES10G(F) Commands
Level Description
Example
spanning-tree enable
G
Enable spanning tree
switch(config)#spanning-tree enable
spanning-tree priority
[0to61440]
G
Configure spanning tree
priority parameter
switch(config)#spanning-tree priority 32767
spanning-tree max-age
[seconds]
G
Use the spanning-tree
max-age global
configuration command to
change the interval
between messages the
spanning tree receives
from the root switch. If a
switch does not receive a
bridge protocol data unit
(BPDU) message from the
root switch within this
interval, it recomputed the
Spanning Tree Protocol
(STP) topology.
switch(config)# spanning-tree max-age 15
spanning-tree hello-time
[seconds]
G
Use the spanning-tree
hello-time global
configuration command to
specify the interval
between hello bridge
protocol data units
(BPDUs).
switch(config)#spanning-tree hello-time 3
spanning-tree forward-time
G
Use the spanning-tree
switch(config)# spanning-tree forward-time
