iES10G(F) User Manual
iS5 Communications Inc.
7
INTRODUCTION
1.1
About the iES10G(F) Series Intelligent Managed Ethernet Switch
The iES10G(F) is an industrial grade managed Ethernet switch with numerous features. The iES10G(F) is
capable of operating under a wide temperature range, dusty environments, and in humid conditions. The
switch can be managed either by using the WEB, TELNET, directly using the Console port on the switch, or any
third-party SNMP software. The switch can also be managed by our own Network Management Suite called
“
iManage”
.
iManage
has a friendly and powerful interface which can be used to easily configure multiple
switches at the same time, and also monitor their status.
1.2
Software Features
World’s fastest Rapid Redundant Ethernet Ring (Recovery time < 30ms with up to 250 units)
Supports Ring Linking, Dual Homing over iRing, and standard STP/RSTP/MSTP
Supports SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN Network Management
Event notification by Email, SNMP trap and Relay Output
Web-based ,Telnet, Console, CLI configuration
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
RSTP (802.1w)
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with double tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, mirroring, security
Remote Monitoring (RMON)
1.3
Hardware Features
Dual Input low-voltage (LV) DC (10-48VDC)
Dual Input medium-voltage (MV) DC (36-75VDC)
Single Input Hi-voltage (HV) AC/DC input (85-264VAC, 88-300VDC) with Single (10-48VDC) backup
Wide Operating Temperature: -40
o
C to +85
o
C
Storage Temperature: -40
o
C to 85
o
C
Operating Humidity: 5% to 95%, non-condensing
Chassis: IP-40 Galvanized Steel
7 x 10/100Base-T(X) Ethernet ports
