iRZ ion connect, User Manual

Page: 42 / 50

42
3.3.3. “Track points” Tab
The Track Points tab is used for the configuration of the navigation tracking points.
The following configurations are available:
Parameter Description
Current location Period in seconds, which specifies the interval of time after which the terminal
will send the data for the display of the location in real time. For example, 30 —
every 30 seconds the coordinates of the current location will be sent to the
server.
Track configuration:
Points saving time
Period in seconds, which specifies the interval of time after which the device
will save the coordinates of the current position. This information will be used
for the construction of the track.
For example, 120 — every 2 minutes the device will save the coordinate of the
current position in its database.
Turning angle degree Turning angle in degrees, above which a coordinate of the current position will
be saved by the device.
For example, 15 — when the direction is shifted by 15 degrees or more, the coor-
dinate of the current position will be saved in the device’s database.
Distance Distance in meters, above which a coordinate of the current position will be
saved by the device.
For example, 100 — every 100 meters the coordinate of the current position will
be saved in the device’s database.
Motion sensor filter Enable/disable of the data filter. When the filter is enabled, if the accelerometer
has captures a parking event, then the data during the parking event will not be
saved.
Fig. 3.5. “Track points” tab