iRZ ion connect, User Manual

Page: 11 / 50

11
* the time may be set using the configurator
or PW#TW1 command
** the time may be set using the configurator
or PW#TW2 command
*** the time may be set using the configurator
or PW#TS1 command
**** the time may be set using the configurator
or PW#TS2 command
Notes:
Main mode
Mode 1 (power-saving mode)
Mode 2 (Sleep mode)
Mode 3 (deep sleep mode)
Switch
to Mode 2
Battery charge is depleted
to critical level
Switch to Mode 3
12 hours ****
12 hours **
24 hours**** 24 hours**** 24 hours****
4 hour*** 4 hour***
The terminal goes online for transmitting accumulated data and current GPS coordinates at set periods of time
(once per 60 minutes by default).
Vehicle movement is not registered. Terminal is powered from onboard network or built-in battery.
Vehicle movement is not registered. Terminal is powered from onboard network or built-in battery.
The terminal goes online to transmit current LBS coordinates at set periods of time (once per 24 hours by default).
The terminal is in maximum power-preservation mode. External power supply is absent.
15 min*
Vehicle movement is registered. Terminal is powered from onboard network or built-in battery.
Vehicle movement was not detected for a set amount of time (15 minutes by default).
Vehicle movement halt
Switch
to Mode 1
Fig. 1.4. iON Connect operation modes diagram